Chemical resistance list prominent 2014

ProMinent® Chemical Resistance List
Resistance of Materials Used in Liquid Ends to the Chemicals Most
Frequently Used
The data apply to standard conditions (20 °C, 1,013 mbar).
= For bonded connections, the resistance of the adhesive (e.g. Tangit) is to be considered. (Materials of the types 'o' and '-' are not recommended !) = does not apply to glass fibre reinforced material Concentration data are stated in weight percent, referred to aqueous solutions. If percentages are stated for the level of resistance, this level of resistance is only valid up to this concentration.
NOTE:
The elastomers CSM (Hypalon®) and IIR (butyl rubber) used as diaphragm materials in pulsation
dampers have properties similar to EPDM.
PTFE is resistant to all chemicals in this list.
PTFE filled with carbon,however, is attacked by strong oxidants such as bromine (anhydrous) or
concentrated acids (phosphoric acid, sulphuric acid, chromic acid).
The resistance of PVC-U adhesive joints with Tangit deviates from the list below with regard to the following Concentration range
Explanation of abbreviations used as column headings:
Acrylic:
Stainless steel 1.4404 & 1.4571 resistance Fluorine Rubber (e.g. Viton® A & B) resistance Ethylene-Propylene-Dien-rubber resistance Pharmed:
Viton® is a registered trademark of DuPont Dow Elastomers
Water endangering classes (WGK):
= No classification. Classification according to conclusion by analogy.
Safety data sheets
Safety data sheets on our products in a number of different languages are provided on our
website.
www.prominent.com/MSDS
ProMinent® Chemical Resistance List
The data has been taken from relevant manufacturer´s documentation and our own tests.
Resistance of materials is also dependant on other factors, e.g. operating conditions, conditions
of surfaces etc, and so this list must be treated as an initial guide only. It cannot claim to offer any
guarantees. It should be taken into consideration in particular that usual dosing media are
compounds, and their corrosiveness cannot be deducted simply by adding the corrosiveness of
each single component. In such cases the chemical producers’ data of the material compatibility
are to be considered as a matter of prime importance for the material choice. A safety data sheet
does not give this data and therefore cannot take the place of the technical documentation on the
application.
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Acetylene Dichloride => Dichloro EthyleneAcetylene Tetrachloride => Tetrachloro EthaneAcrylonitril ProMinent® Chemical Resistance List
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Bitter Salt => Magnesium SulphateBleach => Sodium HypochloriteBlue Vitriol => Copper SulphateBorax => Sodium TetraborateBoric Acid Carbolic Acid => PhenoleCarbon Disulphide Caustic Potash => Potassium HydroxideCaustic Soda => Sodium HydroxideChloric Acid Chlorinated Lime => Calcium HypochloriteChlorine Dioxide Solution Chloroprene => ChlorobutadieneChlorosulphonic Acid Chrome-alum => Potassium Chrome SulphateChromic Acid ProMinent® Chemical Resistance List
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Cubic Nitre => Sodium NitrateCumene => Isopropyl BenzeneCyclo Hexane Cyclohexyl Alcohol => CyclohexanolCyclohexylamine Decaline => DecahydronaphthaleneDextrose => GlucoseDiacetonalcohol Dimethyl Ketone => AcetoneDimethyl Phthalate HydrogenphosphateDisulfur Acid -- OleumDisulphur Dichloride Epsom salts => Magnesium SulphateEthanol ProMinent® Chemical Resistance List
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Ethylene Dibromide => DibromoethaneEthylene Dichloride => Dichloro EthaneEthylene Glycol => GlycolEthylenglycol Ethylether Fixing Salt => Sodium ThiosulphateFluoro Benzene Glauber´s Salt => Sodium SulphateGlucose Iron Vitriol => Ferrous SulphateIsobutanol => Isobutyl AlcoholIsobutyl Alcohol ProMinent® Chemical Resistance List
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Isopropanol => Isopropyl Alcohol Isopropyl Acetate Kitchen Salt => Sodium ChlorideLactic Acid Lead Sugar => Lead AcetateLead Sulphate Lime Milk => Calcium HydroxideLiquid Ammonia => Ammonium HydroxideLithium Bromide Lunar Caustic => Silver NitrateMagnesium Carbonate Methylene Chloride => Dichloro MethaneMirabilit => Sodium SulphateMorpholine Muriatic Acid => Hydrochloric AcidNatron => Sodium BicarbonateNickel-II-Acetate ProMinent® Chemical Resistance List
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Orthophosphoric Acid => Phosphoric AcidOxalic Acid Pentanol => Amyl AlcoholPerchloric Acid Perchloroethylene => Tetrachloro EthylenePerhydrol => Hydrogen PeroxidePetroleum Ether Potash Alum => Potassium Aluminium SulphatePotassium Acetate Potassium Pyrochromate => Potassium DichromatePotassium Sulphate Prussic Acid => Hydrogen CyanidePyridine ProMinent® Chemical Resistance List
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Roman Vitriol => Copper SulphateSalicylic Acid Salmiac => Ammonium ChlorideSaltpeter => Potassium NitrateSilic Acid Slaked Lime => Calcium HydroxideSoda => Sodium CarbonateSodium Acetate Sodium Hydrogen Sulphate => Sodium BisulphateSodium Hydroxide Sublimate => Mercury-II-ChlorideSuccinic Acid Sulphur Chloride => Disulphur DichlorideSulphuric Acid Sulphuric Acid, fuming --> OleumSulphurous Acid ProMinent® Chemical Resistance List
Chemical
Conc Acryl PVC
PVDF 1.4404 FPM EPDM Tygon PharMed PE HastelloyC WPC
Tetrachloromethane => Carbon TetrachlorideTetrahydro Furane Tetralin => Tetrahydro NaphthaleneTHF => TetrahydrofuraneThionyl Chloride Trichloro Methane => ChloroformTrichloroacetaldehyde Trilene => Trichloro EthaneTrioctyl Phosphate ProMinent® Chemical Resistance List
Overview Of The Resistance Of Soft PVC Hoses (Guttasyn®) To The
Most Common Chemicals
This data applies to standard conditions (20 °C, 1013 mbar).
The data has been taken from relevant manufacturers' literature and supplemented by our own
tests and experience. As the resistance of a material also depends on other factors, especially
pressure and operating conditions etc, this list should merely be regarded as an initial guide and
does not claim to offer any guarantees. Take into consideration the fact that conventional dosing
agents are largely compounds, the corrosiveness of which cannot simply be calculated by adding
together the corrosiveness of each individual component. In cases such as these the material
compatibility data produced by the chemical manufacturer must be read as a matter of priority
when selecting a material. Safety data sheets do not provide this information and cannot
therefore replace application-specific documentation.
Corrosive agent
Concentration in % Temperature in °C
Evaluation
ProMinent® Chemical Resistance List
Corrosive agent
Concentration in % Temperature in °C
Evaluation
Oils => fats, diesel oil, Lubricating oil and ProMinent® Chemical Resistance List
Corrosive agent
Concentration in % Temperature in °C
Evaluation

Source: http://www.flowcenter.fi/Portaldata/1/Resources/_transfer/2013/20131220_7214_Chemical-Resistance-List-ProMinent.pdf