Dl.com.tr

E.C.Safety Data Sheets
Tradename:
mega-Model Resin
(Rapid hardening medelation resin /Powder) 1. Identification of the substance/preparation and of the company/undertaking

Information on the product

Trade name:
mega Model Resin Powder
Use / Purpose:
Cold-curing acrylic, powder component of the 2-component acrylic system (polymer & monomer) for the purpose of producing individual Information on the manufacturer
2. Hazards identification

3. Composition/information on ingredients

Chemical characterization

Hazardous ingredients

Benzoyl peroxide

4. First aid measures

After inhalation:

In case of inhalation remove casualty to fresh air and allow to rest. If irritation persists seek medical After contact with skin:

In case of contact with skin wash off immediately with soap and water. If skin irritation occurs, seek After contact with eyes:

In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. After ingestion:

If irritations occur seek medical advice. 5. Fire-fighting measures

Suitable extinguishing media:

Water spray jet, foam, dry powder, carbon dioxide Unsuitable extinguishing media due to safety reasons:

Special protective equipment:
Wear self-contained respiratory protective device E.C.Safety Data Sheets
Tradename:
mega-Model Resin
(Rapid hardening medelation resin /Powder) 6. Accidental related measures

Measures for cleaning

Soak up with absorbent material (e.g. Vermiculite) and dispose of in accordance with government 7. Handling and storage

Handling
Instructions on safe handling
Information on fire and explosion protection

Take precautionary measures against static discharges. In the event of fire, cool the endangered Requirements for storage areas and containers
8. Exposure controls/personal protection

Components or products of decomposition according to point 10, with limit values related to the
workplace which require monitoring.

TLV-Value for

Remarks:

Sensitizing; Y: Danger of damage to unborn children is not to be feared as long as the TLV value TLV-Value for

Personal protective equipment

General protective measures:

Hygiene measures:

Follow the regular standards of occupational hygiene. Respiratory protection:
Filtering half mask in case of dust formation. Eye protection:
Body protection:
Hand protection:
E.C.Safety Data Sheets
Tradename:
mega-Model Resin
(Rapid hardening medelation resin /Powder) 9. Physical and chemical properties

Appearance

Changes in physical state

Softening temperature
Meltingpoint
Flashpoint
Ignition temperature
Self ignition ability
lower explosion limit
upper explosion limit
vapour pressure
bulk density
solubitity in water
qualitative solubility
e.g. in esters, ketones and chlorinated hydrocarbons readily soluble pH-value
Additional information
Dust explosions are generally to be expected with dust-forming organic products. 10. Stability and reactivity

Thermal decomposition:

Hazardous reactions:

Hazardous decomposition products:
None when used as directed. During thermal decomposition combustible, the eyes and respiratory system irritating vapours are formed, consisting mainly of Methyl methacrylate.
11. Toxicological information

The following information is related to the component dibenzoyl peroxide.

Acute oral toxicity:

There are no toxicological data available fort his product. Sensitization:
Allergic reactions on humans were recorded. Carcinogenicity:

The substance shows tumor promoting properties in animal test. Additional information on toxicology:

The fine particles contained in the product may cause mechanical irritations of the skin, eyes and 12. Ecological information

Additional ecological information

Do not allow to enter soil, waterways or waste water. E.C.Safety Data Sheets
Tradename:
mega-Model Resin
(Rapid hardening medelation resin /Powder) 13. Disposal considerations

Product (Components, powder and liquid)

European waste code:
Wastename:
Not yet cured acrylic leftovers, compounds or components. Recommendations:
Must be disposed of in accordance with the regulations of the local authorities and the disposal company in a suitable and licensed Already cured acrylic leftovers

European waste code:
Wastename:
Recommendations:
Can be disposed of in accordance with the regulations of the local authorities and the disposal company in a suitable and licensed Contaminated packaging:

Can be burned in accordance to local regulations. Recommendations:

Dispose decontaminated packaging at local recycling facilities. 14. Transport information

Transport / additional information

Not a hazardous material within the meaning of transportation regulations. 15. Regulatory information

Labeling in accordance to 1999/45/EC:
Additional regulations for compounds according to 1999/45/EC Annex V ch. B

„Contains dibenzoyl peroxide. May cause al ergic reactions.“ Hazard-determining components of labeling:
Hazard symbols

Risk phrases (R-phrases)

Safety phrases (S-phrases)

National regulations (germany)

Waterhazardclass:
1 (self-asessment)6. Other information
16. Other information


This information and all further technical advice is based on our present knowledge and experience. However, it implies Iiability or other
legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In
particular, no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We
reserve the right to make any changes according to technological progress or further developments. The customer is not released from
the obligation to conduct carful inspection and testing of incoming goods. Performance of the product described here in should be
verified by testing which should be carried out only by qualified experts in the sole responsibility of a costumer. Reference to trade
names used by other companies is neither a recommendation, not does it imply that similar products could not be used.

Source: http://www.dl.com.tr/downloads/msds/megadental/R_mega_Model_Resin_Pulver_SDB_EN_.pdf