Bond-it.co.uk

SAFETY DATA SHEET
according to 1907/2006/EC, Article 31
ANCHORBOND
Revision
Revision date 2012-05-23
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name
ANCHORBOND
Product code
BDAB310/380
1.2. Relevant identified uses of the substance or mixture and uses advised against
Description
Adhesive.
1.3. Details of the supplier of the safety data sheet
Company
SEAL IT SERVICES LTD
T/A BOND IT
Unit G16 Riverbank Way,
Lowfields Business Park,
Elland,
West Yorkshire HX5 9DN
www.bond-it.co.uk
Telephone
01422 315300
01422 315310
[email protected]
1.4. Emergency telephone number
Emergency telephone number
01422 315300
8.30AM - 5.30PM Mon-Fri
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
2.1.1. Classification -
Xn; R20 Xi; R36/38-43 R10
1999/45/ЕC
Symbols: Xn: Harmful.
Main hazards
Flammable. Harmful by inhalation. Irritating to eyes and skin. May cause sensitisation by skin
contact.
2.2. Label elements
The product is classified in accordance with 67/548/EEC.
Xn: Harmful.
Risk phrases
R10 - Flammable.
R20 - Harmful by inhalation.
R36/38 - Irritating to eyes and skin.
R43 - May cause sensitisation by skin contact.
Safety phrases
S1/2 - Keep locked up and out of the reach of children.
S13 - Keep away from food, drink and animal feedingstuffs.
Copyright 2012 ChemSoft Limited. All rights reserved.
Powered by
Print date 2012-05-23
ANCHORBOND
Revision
Revision date 2012-05-23
2.2. Label elements
S24 - Avoid contact with skin.
S37 - Wear suitable gloves.
S46 - If swallowed, seek medical advice immediately and show this container or label.
2.3. Other hazards
Other hazards
No data is available on this product.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
67/548/EEC / 1999/45/EC
Chemical Name
Index No.
REACH Registration
Classification
601-026-00-0
100-42-5
202-851-5
10 - 20% R10 Xn; R20 Xi; R36/38
Benzoyl peroxide (Dibenzoyl
617-008-00-0
202-327-6
1 - 10% E; R3 O; R7 Xi; R36 R43
peroxide)
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation
Move the exposed person to fresh air.
Eye contact
Rinse immediately with plenty of water for 15 minutes holding the eyelids open.
Skin contact
Wash off immediately with plenty of soap and water. Remove contaminated clothing.
Ingestion
DO NOT INDUCE VOMITING.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation
Inhalation may cause nausea and vomiting. May cause dizziness and headache.
Eye contact
May cause irritation to eyes.
Skin contact
May cause dermatitis. May cause irritation to skin.
Ingestion
Harmful if swallowed. Ingestion is irritating to the respiratory tract and may cause damage to the
central nervous system. Ingestion may cause nausea and vomiting.
4.3. Indication of any immediate medical attention and special treatment needed
Inhalation
Seek medical attention.
Eye contact
Seek medical attention if irritation or symptoms persist.
Skin contact
Seek medical attention if irritation or symptoms persist.
Ingestion
If swallowed, seek medical advice immediately and show this container or label.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Use as appropriate: Carbon dioxide (CO2), Dry chemical, Foam. Use extinguishing media
appropriate to the surrounding fire conditions.
5.2. Special hazards arising from the substance or mixture
Burning produces irritating, toxic and obnoxious fumes.
5.3. Advice for firefighters
Self-contained breathing apparatus. Wear protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation of the working area. Wear suitable protective equipment.
6.2. Environmental precautions
Do not allow product to enter drains. Prevent further spillage if safe.
6.3. Methods and material for containment and cleaning up
Copyright 2012 ChemSoft Limited. All rights reserved.
Powered by
Print date 2012-05-23
ANCHORBOND
Revision
Revision date 2012-05-23
6.3. Methods and material for containment and cleaning up
Absorb with inert, absorbent material. Transfer to suitable, labelled containers for disposal. Clean
spillage area thoroughly with plenty of water.
6.4. Reference to other sections
See section 13. Disposal Considerations, 8. PPE for further information.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Avoid contact with eyes and skin. Ensure adequate ventilation of the working area. Adopt best
Manual Handling considerations when handling, carrying and dispensing.
7.2. Conditions for safe storage, including any incompatibilities
Keep in a cool, dry, well ventilated area. Keep containers tightly closed. Keep away from sources
of ignition - No smoking.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No data is available on this product.
8.1.1. Exposure Limit Values
Benzoyl peroxide (Dibenzoyl
WEL 8-hr limit ppm: -
WEL 8-hr limit mg/m3: 5
peroxide)
WEL 15 min limit ppm: -
WEL 15 min limit mg/m3: -
WEL 8-hr limit ppm: 100
WEL 8-hr limit mg/m3: 430
WEL 15 min limit ppm: 250
WEL 15 min limit mg/m3: 1080
8.2. Exposure controls
8.2.1. Appropriate engineering Ensure adequate ventilation of the working area.
controls
8.2.2. Individual protection
Wear chemical protective clothing.
measures
Eye / face protection
Approved safety goggles.
Skin protection -
Chemical resistant gloves (PVC).
Handprotection
Respiratory protection
Self-contained breathing apparatus. Wear protective clothing.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Copyright 2012 ChemSoft Limited. All rights reserved.
Powered by
Print date 2012-05-23
ANCHORBOND
Revision
Revision date 2012-05-23
9.1. Information on basic physical and chemical properties
State Paste
Colour Brown
Odour Characteristic
pH No data available
Melting point No data available
Freezing Point No data available
Boiling point No data available
Flash point 32 °C
Evaporation rate No data available
Flammability limits No data available
Vapour Flammability No data available
Vapour pressure No data available
Vapour density No data available
Relative density 1.19 - 1.49
Fat Solubility No data available
Partition coefficient No data available
Autoignition temperature No data available
Viscosity No data available
Explosive No data available
Oxidising No data available
Solubility No data available
9.2. Other information
Conductivity No data available
Surface tension No data available
Gas group No data available
SECTION 10: Stability and reactivity
10.1. Reactivity
No data is available on this product.
10.2. Chemical stability
Stable under normal conditions. The catalyst undergoes self accelerating decomposition at and
above 50 degrees C. The resin cna solidify exothermically if heated, exposed to sunlight or air.
10.3. Possibility of hazardous reactions
No data is available on this product.
10.5. Incompatible materials
Oxidising agents. Peroxides. Acids. Alkalis. Reducing agents.
10.6. Hazardous decomposition products
No data is available on this product.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity
Harmful by inhalation.
Skin corrosion/irritation
May cause irritation to skin.
11.1.4. Toxicological Information
No data available
SECTION 12: Ecological information
12.1. Toxicity
No data available
Copyright 2012 ChemSoft Limited. All rights reserved.
Powered by
Print date 2012-05-23
ANCHORBOND
Revision
Revision date 2012-05-23
12.5. Results of PBT and vPvB assessment
No data is available on this product.
12.6. Other adverse effects
No data is available on this product.
SECTION 13: Disposal considerations
General information
Dispose of in compliance with all local and national regulations.
Disposal methods
Dispose of in compliance with all local and national regulations.
Disposal of packaging
Do NOT reuse empty containers.
SECTION 14: Transport information
Hazard pictograms
14.1. UN number
14.2. UN proper shipping name
RESIN SOLUTION
14.3. Transport hazard class(es)
ADR/RID
Subsidiary risk
Subsidiary risk
Subsidiary risk
14.4. Packing group
Packing group
14.5. Environmental hazards
Environmental hazards
Marine pollutant
14.6. Special precautions for user
No data is available on this product.
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data is available on this product.
ADR/RID
Hazard ID
Tunnel Category
IMDG
EmS Code
IATA
Packing Instruction (Cargo)
Copyright 2012 ChemSoft Limited. All rights reserved.
Powered by
Print date 2012-05-23
ANCHORBOND
Revision
Revision date 2012-05-23
IATA
Maximum quantity
Packing Instruction
(Passenger)
Maximum quantity
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Regulations
REGULATION (EC) No 1907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC
and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94
as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC,
93/105/EC and 2000/21/EC.
SECTION 16: Other information
Other information
Text of risk phrases in Section R3 - Extreme risk of explosion by shock, friction, fire or other sources of ignition.
3
R7 - May cause fire.
R10 - Flammable
R20 - Harmful by inhalation.
R36/38 - Irritating to eyes and skin.
R36 - Irritating to eyes.
R43 - May cause sensitisation by skin contact.
Further information
The information supplied in this Safety Data Sheet is designed only as guidance for the safe use,
storage and handling of the product. This information is correct to the best of our knowledge and
belief at the date of publication however no guarantee is made to its accuracy. This information
relates only to the specific material designated and may not be valid for such material used in
combination with any other materials or in any other process.
Copyright 2012 ChemSoft Limited. All rights reserved.
Powered by
Print date 2012-05-23

Source: http://www.bond-it.co.uk/wp-content/uploads/2013/10/ANCHORBOND-msds.pdf